Services

Precision Servicesfor Every Surface.

Every vehicle begins with a thorough inspection. Service recommendations are made based on actual paint condition, material type, and the client’s objective — not assumptions.

01
Paint Correction

Multi-Stage Paint Correction

The most technically demanding process in automotive finishing — done without compromise.

Duration

1–3 days

Best For

Vehicles with swirl marks, haze, oxidation, or paint defects from improper washing or previous work.

Black Mercedes-AMG GT 63 prepared for precision paint correction in a premium detailing studio

Paint correction is the systematic reduction or elimination of surface-level paint defects through machine polishing. Using calibrated polishers and a sequence of diminishing abrasive compounds, our technicians work panel-by-panel to restore the clarity and depth that factory paint is capable of.

The process begins with paint thickness measurement on every panel, establishing a safe working range for abrasion. Decontamination and clay treatment remove embedded surface contamination before any polishing begins. A test panel confirms compound selection and polisher speed before full correction commences across the vehicle.

What Is Included

Paint thickness measurement on all panels
Safe chemical decontamination
Iron fallout and tar removal
Clay bar decontamination
Test panel completion before full work begins
Single or multi-stage machine polishing
Gloss refinement and final panel inspection
Paint wipe-down and protection application
Expected Result

A paint surface that reflects light correctly, with visible depth, clarity, and the absence of surface distortion. The degree of improvement depends on paint hardness, defect depth, and the number of correction stages completed.

02
Ceramic Coating

Ceramic Coating

Semi-permanent surface protection bonded at the molecular level.

Duration

1–2 days + cure time

Best For

Owners seeking long-term surface protection and reduced maintenance demands.

Gloss black Audi RS6 Avant protected with ceramic coating inside a premium automotive detailing studio

Ceramic coatings form a chemically bonded protective layer above the clear coat, providing hydrophobic properties, enhanced gloss, and resistance to environmental contamination. The vehicle must be properly prepared and corrected before application — coating over existing defects encases them permanently.

We do not offer ceramic coating without first assessing the paint. Coating over imperfections significantly raises the cost of any future correction work. Every vehicle is inspected and corrected to an appropriate standard before any coating commences.

What Is Included

Paint correction (required — extent confirmed after inspection)
Panel preparation and IPA wipe-down
Single or multi-layer ceramic application
Hydrophobic surface properties
Enhanced gloss and paint depth
Optional wheel face coating
Optional exterior glass treatment
Written aftercare guide and follow-up inspection
Expected Result

A protected paint surface with sustained gloss, easier cleaning, and resistance to environmental bonding. Performance is dependent on aftercare quality. Protection duration is package-dependent and not guaranteed.

03
Exterior Detail

Signature Exterior Detail

A complete exterior restoration without machine polishing.

Duration

4–6 hours

Best For

Well-maintained vehicles requiring seasonal restoration or pre-event preparation.

Graphite BMW M4 Competition after a signature exterior detail inside a premium automotive studio

The Signature Exterior Detail is our thorough, multi-stage cleaning and protection service for vehicles in good cosmetic condition. It leaves the paintwork clean, decontaminated, and sealed — ready for the road or as preparation for a subsequent correction stage.

What Is Included

Pre-rinse and snow foam pre-wash
Two-bucket hand wash method
Wheel and wheel arch cleaning
Iron fallout decontamination
Chemical tar removal
Clay bar treatment
Paint sealant application
Tyre dressing and exterior trim restoration
Expected Result

A visibly cleaner, protected, and refreshed exterior ready for the road or the next correction stage.

04
Interior

Interior Restoration

Systematic deep-cleaning of every interior surface.

Duration

4–8 hours

Best For

Vehicles showing interior wear, staining, or those requiring preparation before sale or appraisal.

Restored black leather Porsche interior inside a premium automotive detailing studio

Modern vehicle interiors — particularly those finished in natural leather, Alcantara, or fine woven materials — require specific cleaning products and techniques appropriate to each surface type and finish.

What Is Included

Full interior vacuum
Steam cleaning of hard surfaces and vent blades
Leather cleaning with pH-neutral products
Leather conditioning
Alcantara and fabric extraction
Plastic and trim restoration
Odour neutralisation treatment
Detail brush cleaning of vents and gaps
Expected Result

A fresh, clean interior that preserves material condition, addresses staining and odour, and extends the longevity of premium interior materials.

05
New Vehicle

New Vehicle Protection

Addressing factory-introduced defects before they become permanent.

Duration

1–2 days

Best For

Owners collecting new or nearly new vehicles who want the best possible starting condition.

Graphite Range Rover Autobiography prepared for new vehicle protection inside the VANTA automotive studio

New vehicles frequently arrive with paint defects introduced during production, transport, and pre-delivery preparation. Our new vehicle process identifies and corrects these defects before any protection layer is applied — ensuring the vehicle begins life in the best possible condition.

What Is Included

Delivery condition inspection and documentation
Paint defect identification and recording
Light to moderate paint correction
Ceramic or polymer protection
Wheel face coating
Exterior glass treatment
Interior protection application
Expected Result

A vehicle protected correctly from the outset — not after years of defects have accumulated.

06
Seasonal

Seasonal Maintenance Detail

Targeted care for Ontario's demanding seasons.

Duration

3–5 hours

Best For

Vehicles used year-round in Ontario that have received previous ceramic or sealant protection.

Dark green Porsche Panamera Turbo S prepared for seasonal maintenance outside the VANTA automotive studio on a rainy autumn day

Toronto's winters — with road salt, grit, and freeze-thaw cycles — are demanding on paintwork, underbodies, and interior materials. Our seasonal service addresses the specific effects of each season and prepares the vehicle for what follows.

What Is Included

Thorough salt and contamination removal
Under-arch and sill cleaning
Paint coating inspection and condition assessment
Sealant or coating top-up where required
Interior deep clean
Leather maintenance
Glass treatment
Seasonal condition notes provided on collection
Expected Result

A vehicle cleaned, assessed, and re-protected appropriately for the upcoming season.

Questions

Frequently Asked

Depending on the extent of defects and the size of the vehicle, paint correction typically takes between one and three days. A single-stage correction on a well-maintained saloon might be completed in a day; a multi-stage correction on a large SUV with significant oxidation may require three. An accurate time estimate is provided after the initial inspection.
Machine polishing removes or significantly reduces surface-level scratches and swirl marks. Scratches that have penetrated through the clear coat and into the colour coat or primer cannot be fully corrected through polishing alone and may require paint touch-up or panel respray. We assess every defect during the inspection and advise honestly on what is and is not achievable.
Frequently, yes. New vehicles are routinely washed and handled at ports, storage facilities, and dealerships using equipment and methods that introduce fine swirl marks and surface contamination. We recommend a paint inspection on all new vehicles before applying any protective coating.
Ceramic coatings do not have a fixed lifespan and should not be presented as having one. Their longevity depends on the product grade, the preparation quality, how the vehicle is washed and maintained, and how it is used. With proper aftercare, a quality coating maintained correctly can perform well for several years. We offer follow-up inspections to assess coating condition.
Yes. Matte, satin, and flat finishes require different products and techniques than gloss paint. We do not use any abrasive polishes on matte finishes; instead we use purpose-formulated matte-safe products. Coating options are also specific to the finish type. Please confirm your finish when enquiring.
Paint correction and ceramic coating work typically requires the vehicle to remain with us for one to three days. Exterior detail and interior services may be completed within a day, depending on the vehicle and scope of work. Exact timelines are confirmed at booking.
We provide written aftercare guidance with every service. The essentials: avoid automatic car washes entirely; use a pH-neutral shampoo and the two-bucket or foam lance method; dry with a quality microfibre towel; and contact us before using any new product on the vehicle. For ceramic-coated vehicles, a periodic maintenance wash and annual inspection is recommended.
We do not offer mobile services for paint correction or ceramic coating. These processes require a controlled, dust-free environment with adequate lighting, equipment access, and stable conditions — none of which can be reliably provided outside of our studio. For basic exterior wash-and-detail services, please enquire directly as limited availability may apply.
Discuss Your Vehicle

Not Sure Which Service Is Right?

Every enquiry begins with a conversation. We advise based on the actual condition of your vehicle — not assumptions.